Help topics
FAQ sections
Hypercom T7Plus

Step 1: Make sure you are on the main "swipe customer card" screen
Step 2: Hit the settle button
Step 3: Verify the correct amount for batch and press enter
Step 4: Verify the correct amount for refund and press enter
Step 5: To settle bath press enter
Step 6: Batch will close and print out report
Step 7: Choose clear to return to the main screen after report has finished printing

Step 1: Make sure you are on the main "swipe customer card" screen
Step 2: Choose function
Step 3: Enter the number 10
Step 4: Set the date (MM/DD/YYYY)
Step 5: Set the time (military time) (HH:MM)
Step 6: Choose enter
Step 7: Choose enter again
Step 8: Back at the main screen the date and time are updated

Step 1: Please ensure your hypercom T7plus is plugged in to the power source
Step 2: Push the "Function" key, followed by the "7" key, the "1" key and "Enter," using the keypad to confirm that the printer is enabled if it's not printing
Step 3: Push the "Function" key, followed by the "8" key, the "2" key and "Enter" to run a printer test to verify its functionality
Step 4: Grasp the paper roll cover tabs on both sides at the same time and squeeze in. Remove the paper roll and verify that it's a thermal roll. Clear any excess or torn paper from the printer area with your fingers
Step 5: Lower the thermal roll into the paper dispenser with the paper feeding from the bottom toward the unit. Pull the flap of paper over the terminal, close the paper cover and tear off the excess
Step 6: Try the transaction again

FD 100

Step 1: Make sure you are are the main Credit/Debit screen
Step 2: Select Credit
Step 3: Select More three times
Step 4: Select Setup Parms
Step 5: Choose View Parms
Step 6: Select Host
Step 7: Choose Credit
Step 8: When prompted for password, enter 990712
Step 9: Choose previous until you see "auto batch time"
Step 10: Select edit
Step 11: Change the time to the desired auto batch time (in military time)
Step 12: Press enter
Step 13: Press the red clear button until you are back at the main Credit/Debit screen

Step 1: Make sure you are on the main Credit/Debit screen
Step 2: Select System
Step 3: Choose Date/Time
Step 4: When prompted to change the date and time choose yes
Step 5: Enter the correct date (MM/DD/YYYY)
Step 6: Choose enter
Step 7: Enter the correct time (military time) (HH:MM:SS)
Step 8: Select enter
Step 9: Hit the red clear button until you are back to the main Credit/Debit screen
Step 10: The updated date and time are now on the main screen

Step 1: Make sure you are on the main Credit/Debit screen
Step 2: Choose credit
Step 3: Select More
Step 4: Choose Close
Step 5: The batch will close and print out a report
Step 6: Hit the red clear button to return to the main Credit/Debit screen

Step 1: Make sure you are are the main Credit/Debit screen
Step 2: Select Credit
Step 3: Select More three times
Step 4: Select Setup Parms
Step 5: Choose View Parms
Step 6: Select Host
Step 7: Choose Credit
Step 8: When prompted for password, enter 990712
Step 9: Choose previous until you see "auto batch"
Step 10: Select disable
Step 11: Press the red clear button until you are back at the main Credit/Debit screen

FD 50

Step 1: Make sure you are on the main credit/debit screen
Step 2: Choose system
Step 3: Select date/time
Step 4: Choose No to change date/time
Step 5: Enter the correct date (MM/DD/YYYY)
Step 6: Enter the correct time (in military time) (HH:MM:SS)
Step 7: Choose enter
Step 8: Hit the red button to return to the main screen

Step 1: Make sure you are on the main Credit/Debit screen
Step 2: Choose credit
Step 3: Select more
Step 4: Choose close
Step 5: Verify total for batch
Step 6: Select yes or no to confirm
Step 7: Batch report will print
Step 8: Hit red button to retun to the main menu
Terminal password: 990712

Lipman Nurit 8020

Step 1: Go to the main CREDIT/SALE/ACCOUNT screen
Step 2: Press the MENU/ESC button
Step 3: The terminal will display the MENU screen
Step 4: Press the number 5 on your keypad
Step 5: The terminal will display the SYSTEMS OPTIONS screen
Step 6: Press the number 1 on your keypad
Step 7: The terminal will display the current date and time in the terminal
Step 8: Press ENTER
Step 9: The terminal will display SETTING DATE: MM/DD/YY
Step 10: By using the keypad, key in the correct date
Step 11: The terminal will automatically display SETTING TIME: HH:MM:00
Step 12: Enter the correct time in military time
Step 13: The terminal will then display the updated date and time you have entered
Step 14: Press the MENU/ESC button three times to return to the main screen